BP MODS LIGHTSABER POD MOD KIT
The new BP Mods Lightsaber Pod Mod Kit, comes in two versions – standard 2200 mAh and compact 1500 mAh. The pod-mod comes with a small zinc case with a comfortable fitted silhouette and a decorative woodgrain insert. There are four colours to choose from with different panels and shades of the metal frame. A polymer cartridge with a twisted faceted cap and two different drip-types for different types of airflow, MTL & DTL. The base was belted with a knurled air ring. A control panel was placed under the connector, consisting of a small display and two adjustment keys.
The activation button and the USB port are installed on the opposite side. The device can operate in wattage, voltages or Bypass modes. The maximum output power will be 60 or 40 watts, depending on the version of the kit. The integrated battery will have a stock of 2200 or 1500 mAh. Charging is carried out via USB Type-C with a current of 2A. The shock-resistant polymer reservoir will hold 2ml of E-Liquid. The cartridge comes with four different coils from the TMD series. In addition, replacement landing rings and a standard 510 connector will be available separately.
To purchase BP Mods TMD Replacement Coils CLICK HERE
- Size: 113 by 27 mm (Model L)
- Size: 96 by 27 mm (Model S)
- Built-in 2200 mAh battery (Model L)
- Built-in 1500 mAh battery (Model S)
- Charging current 2A
- Maximum power: 60 Watts (Model L)
- Maximum power: 40 Watts (Model s)
- Tank volume: 2 ml
WHAT’S IN THE BOX:
- 1x Lightsaber Mod
- 1x Pod Tank
- 1x TMD Pro Series of 0.55Ohm
- 1x TMD Mesh Series of 0.3Ohm
- 1x MTL Drip Tip
- 1x DL Drip Tip
- 1x USB-C cable
- 1x O-Rings & Silicon Plug
- 1x User Manual
Always remember to prime your coils well before use to help give you the best coil life possible.